Dividend sustainability is paramount for the high-yield investor. Having a stock cut its dividend could potentially crush its income. A high-yield investor is less concerned about dividend growth than maintaining the current high yield. Most traditional dividend growth stocks pay a moderate to low yield, thus sustainability is not enough. The dividend growth investor also expects substantial and consistent growth.
Below are several companies not only sustaining their dividends, but growing them:
YUM! Brands Inc. (YUM) operates quick service restaurants in the United States and internationally. September 19th the company increased its quarterly dividend 10% to $0.37 per share. The dividend is payable November 1, 2013 to shareholders of record at the close of business on October 11, 2013. The yield based on the new payout is 2.1%.
Texas Instruments Inc. (TXN) engages in the design, manufacture, sale of semiconductors to electronics designers and manufacturers worldwide. September 19th the company increased its quarterly dividend 7% to $0.30 per share. The dividend is payable November 18, 2013, to stockholders of record on October 31, 2013. The yield based on the new payout is 3.9%.
10 Best Blue Chip Stocks To Invest In 2015: Micron Technology Inc.(MU)
Micron Technology, Inc., together with its subsidiaries, engages in the manufacture and marketing of semiconductor devices worldwide. Its products include dynamic random access memory (DRAM) products that provide data storage and retrieval, which include DDR2 and DDR3; and other specialty DRAM memory products, including DDR, SDRAM, DDR and DDR2 mobile low power DRAM, pseudo-static RAM, and reduced latency DRAM. The company also offers NAND flash memory products, which are electrically re-writeable and non-volatile semiconductor devices that retain content when power is turned off. In addition, it provides NOR flash memory products that are electrically re-writeable and non-volatile semiconductor memory devices; phase change memory products; and image sensor products. Micron Technology?s products are used in a range of electronic applications, including personal computers, workstations, network servers, mobile phones, flash memory cards, USB storage devices, digital still c ameras, MP3/4 players, and in automotive applications. It sells its products to original equipment manufacturers and retailers through internal sales force, independent sales representatives, and distributors, as well as through a Web-based customer direct sales channel. The company was founded in 1978 and is headquartered in Boise, Idaho.
Advisors' Opinion:- [By Garrett Cook]
Micron Technology (NASDAQ: MU) shares were also up, gaining 5.07 percent to $32.85 after the company reported better-than-expected fiscal third-quarter earnings. Micron posted its adjusted earnings of $0.79 per share, beating analysts’ estimates of $0.69 per share.
Top Semiconductor Companies To Invest In 2014: Aixtron SE (AIXG)
AIXTRON SE (AIXTRON), formerly AIXTRON AG, incorporated in 1983, is a provider of deposition equipment equipment to the semiconductor and compound-semiconductor industry. The Company's technology solutions are used by a diverse range of customers worldwide to build advanced components for electronic and opto-electronic applications based on compound, silicon, or organic semiconductor materials. Such components are used in fiber optic communication systems, wireless and mobile telephony applications, optical and electronic storage devices, computing, signaling and lighting, displays, as well as a range of other technologies. AIXTRON's business activities include developing, producing and installing equipment for coating semiconductor materials, process engineering, consulting and training, including ongoing customer support. AIXTRON supplies to customers both full production-scale complex material deposition systems and small scale systems for research and development (R&D) use and small-scale production use.
AIXTRON's product range includes customized production and research scale compound semiconductor systems capable of depositing material films on up to 95 * two-inch diameter wafers per single production run, or smaller multiples of larger diameter wafers, employing MOCVD or Hydride Vapor Phase Epitaxy (HVPE) or organic thin film deposition on up to Gen. 3.5 substrates, including Polymer Vapor Phase Deposition (PVPD) or Organic Vapor Phase Deposition (OVPD) or large area deposition for Organic Light Emitting Diodes (OLED) applications or Plasma Enhanced Chemical Vapor Phase Deposition (PECVD) for depositing complex Carbon Nanostructures (Carbon Nanotubes, Nanowires or Graphene). AIXTRON also manufactures full production and research scale deposition systems for silicon semiconductor applications capable of depositing material films on wafers of up to 300 millimeters diameter, employing technologies, such as Chemical Vapor Deposition (CVD), Atomic Vapor Deposition (AVD) and Atomic Layer! Deposition (ALD).
AIXTRON also offers a range of peripheral equipment and services, including products capable of monitoring the concentration of gases in the air and for cleaning the exhaust gas from metal organic chemical vapor deposition processes. The Company also assists its customers in designing the production layouts for the gas supply to thin film deposition systems. Additionally, the Company offers its customers training, consulting and support services.
The Company competes with Veeco Instruments Inc. (USA), Taiyo Nippon Sanso (Japan), Ulvac, Inc. (Japan), Tokki Corporation (Japan), Sumitomo (Japan), Applied Materials, Inc. (USA), Doosan DND Co., Ltd. (South Korea), Sunic System (South Korea), Tokyo Electron Ltd. (Japan), ASM International N.V. (Netherlands), IPS Technology (South Korea), Jusung Engineering Co. Ltd. (South Korea), and Hitachi Kokusai Electric Co. Inc. (Japan).
Advisors' Opinion:- [By Rich Smith]
This series, brought to you by Yahoo! Finance, looks at which upgrades and downgrades make sense and which ones investors should act on. Today, our headlines include upgrades for both industrialist Aixtron (NASDAQ: AIXG ) and fashionista bebe stores (NASDAQ: BEBE ) . But the news isn't all good, so let's start off with a few words on...
Top Semiconductor Companies To Invest In 2014: Camtek Ltd (CAMT)
Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company�� AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar's assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automated scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.
As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company's PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.
Camtek�� AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer�� factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.
The Company�� Falcon systems are designed for the back end market of the semiconductor industry. The Falcon�� advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.
Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market�� special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafer is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.
The Company�� AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark - Camtek's and detection engine providing high detection capabilities, while minimizing false calls.
Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types in a mass production environment. Dragon models are optimized for specific PCB technology ranges - from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.
LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these masks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.
GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek has developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.
The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.
Advisors' Opinion:- [By Eddie Staley]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 15.54 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.85 percent.
- [By Paul Ausick]
Stocks on the Move: Ingersoll-Rand is down 22.2% at $55.54 after completing a spin-off of Allegion plc. Canadian National Railway Co. (NYSE: CNI) is down 48.6% at $57.78 following a 2-for-1 stock split. Camtek Ltd. (NASDAQ: CAMT) is up 38.9% at $5.71.
Top Semiconductor Companies To Invest In 2014: NVIDIA Corporation(NVDA)
NVIDIA Corporation provides visual computing, high performance computing, and mobile computing solutions that generate interactive graphics on various devices ranging from tablets and smart phones to notebooks and workstations. It operates in three segments: Graphic Processing Unit (GPU), Professional Solutions Business (PSB), and Consumer Products Business (CPB). The GPU segment offers GeForce discrete and chipset products, which support desktop and notebook personal computers plus memory products. The PSB segment provides its Quadro professional workstation products and other professional graphics products, including its NVIDIA Tesla high-performance computing products used in the manufacturing, entertainment, medical, science, and aerospace industries. The CPB segment offers Tegra mobile products, which support tablets, smartphones, personal media players, Internet television, automotive navigation, and other similar devices. This segment also licenses video game consol es and other digital consumer electronics devices. The company sells its products to original equipment manufacturers, original design manufacturers, add-in-card manufacturers, consumer electronics companies, and system builders worldwide that utilize its processors as a core component of their entertainment, business, and professional solutions. NVIDIA Corporation was founded in 1993 and is headquartered in Santa Clara, California.
Advisors' Opinion:- [By Evan Niu]
Under the hood, Qualcomm (NASDAQ: QCOM ) has indeed displaced NVIDIA (NASDAQ: NVDA ) as the processor vendor, with the second-generation Nexus 7 sporting a Snapdragon S4 Pro instead of a Tegra. While NVIDIA had delayed its Tegra 4 in order to focus on its Tegra 4i, the new Nexus 7's later-than-expected launch puts it within reach of NVIDIA's Tegra 4 schedule (ramping this quarter).
- [By John Udovich]
Ratings agencies issuing their opinions about chip stock Advanced Micro Devices, Inc (NYSE: AMD) would be some of the news for investors in the stock or in competitors like Intel Corporation (NASDAQ: INTC) and NVIDIA Corporation (NASDAQ: NVDA) will want to digest. I should mention that we previously had an open position in Advanced Micro Devices in our SmallCap Network Elite Opportunity (SCN EO) portfolio from last summer up until late January when we locked in a small loss. We got out not because we don�� believe in AMD�� long term potential, but because our SCN EO is a trading portfolio rather than a long term buy and hold portfolio. Moreover, AMD�� shares had sunk again after the company reported earnings ��a repeat performance of what happened after the last three previous earnings reports. Nevertheless, AMD has been producing a steady stream of good or interesting news for investors and traders alike:
Top Semiconductor Companies To Invest In 2014: Aeroflex Holding Corp (ARX)
Aeroflex Holding Corp. (Aeroflex Holding) is a provider of radio frequency (RF) and microwave integrated circuits, components and systems used in the design, development and maintenance of wireless communication systems. The Company�� solutions include microelectronic components and test and measurement equipment used by companies in the space, avionics and defense; commercial wireless communications, and medical and other markets. Its products include a range of RF, microwave and millimeter wave microelectronic components, integrated circuits (ICs), and analog and mixed-signal devices. It also manufactures a range of RF and microwave wireless radio and avionics test equipment and solutions particularly for the wireless, avionics and radio test markets. The Company operates in two segments: Aeroflex Microelectronics Solutions (AMS) and Aeroflex Test Solutions (ATS). In August 2010, it acquired Advanced Control Components. In September 2013, the Company announced the sale of its Aeroflex Test Equipment Services (ATES) business to Trescal Limited. In February 2014, Aeroflex Holding Corp announced the acquisition of Shenick Network Systems.
Aeroflex Microelectronic Solutions
AMS offers a range of microelectronics products and is a provider of specialty products for the space, avionics, defense, commercial wireless communications, medical and other markets. RadHard products are specifically designed to tolerate high radiation level environments, which otherwise can degrade electronic components. The Company principally operates on a fabless semiconductor manufacturing model, outsourcing virtually all front-end semiconductor fabrication activities to commercial foundries. AMS offers a range of complementary products that provide connectivity and computing functionality for applications. Its product portfolio includes RF, microwave and millimeter wave products, including discrete components, ICs, monolithic microwave ICs and multi-chip modules.
AMS designs and manu! factures application specific, analog and mixed-signal devices for use in medical, industrial and intelligent sensors. The Company�� AMS products are used in over 100 space, avionics and defense platforms, including the Wideband Global Satellite Communications satellites, the Geostationary Operational Environmental satellites, the Advanced Extremely High Frequency satellites, the Boeing 777 airliner's databus, the F-16's modular mission computer, the B-1 flight controls upgrade and the Terminal High Altitude Area Defense program. Its AMS products are also used in wireless communications platforms, including WCDMA and LTE cellular base station systems, as well as point-to-point broadband radio applications. In the medical area, our products are used by two of the top four manufacturers of CT scan equipment.
AMS provides HiRel standard and custom integrated circuits and circuit card assembly for the aerospace, altitude avionics, medical, x-ray cargo scanners, critical transportation systems, nuclear power controls, global positioning systems (GPS) receivers, networking and telecommunication markets. AMS' HiRel products include transceivers, analog multiplexers, clock management generators, MSI logic products, battery electronics units, voltage regulators, high-speed power controllers, MIL-STD 1553 bus controllers, remote terminals, bus monitors, microcontrollers and microprocessors, RadHard Pulse Width Modulation Controllers, RadHard Resolver-to-Digital and memory modules. HiRel Microelectronics/ Semiconductors have a typical life cycle of 10-20 years.
AMS provides a set of standard and application specific RF/microwave diodes and semiconductor devices. Microwave semiconductor products offered include diodes, amplifiers, resistors, inductors, capacitors, switches, and integrated devices. RF and Microwave active components and subsystems offered include PIN diode-based microwave control components, variable attenuators, phase shifters, limiters, time delay units and Multi-Funct! ion Micro! wave assemblies. AMS offers resistor products, which include a variety of low and high reliability power surface mounted passive devices for the wireless infrastructure and defense markets with applications in isolators, circulators, single and multi-carrier power amplifiers and circuits. Passive components offered include attenuators, terminations, adapters, DC blocks, and other components for commercial, military and laboratory applications. Other products include power amplifiers, up and down converters, mixers, filters and micro-receivers operating to over 40 giga hertz (GHz). RF and Microwave components have a typical life cycle of 5-15 years. The Company�� motion control products provide complete and integrated motion control solutions for space (both military and commercial), military, avionics, and industrial customers. Its product line offerings include actuators and mechanisms, electronic controllers, slip rings and twist capsules, DC motors and Gimbal Systems. Motion control products have a typical life cycle of 10-20 years.
Aeroflex Test Solutions
ATS is a provider of a line of specialized test and measurement hardware and software products, primarily for the space, avionics, defense, commercial wireless communications and other markets. ATS products and their applications include wireless test equipment, which is used to develop and test handsets and base stations; military radio and PMR test equipment, which is used by radio manufacturers and military, police, fire, and emergency response units to test handheld radios; avionics test equipment, which is used in the design, manufacture and maintenance of electronics systems for aircraft; synthetic test equipment, which is used to test satellites and transmit / receive modules prior to launch and deployment, and general purpose test equipment, including spectrum analyzers and signal generators.
Wireless Test Equipment is used by wireless service providers and equipment manufacturers to test wireless ! handsets ! and base stations. The Company offers a range of cellular tests across a range of wireless standards and communication frequencies, including 2G and 3G, with particular capability in EDGE protocols, and the new 4G LTE/LTE(A) protocols. Products include a range of system, protocol, physical layer and parametric test solutions, such as the TM500 test mobile, RF synthesizers, digitizers and combiners, and application software. In addition, ATS provides PXI-based products which are modular scalable solutions for the handset manufacturing environment. Product applications include research and development, conformance, manufacturing/production, installation and commissioning, field service, and network optimization.
ATS Radio Test Equipment is used by radio manufacturers and military, police, fire and emergency response units to test handheld radio units. ATS provides TErrestrial Trunked Radio (TETRA), and Project 25 (P25), radio test equipment, addressing both mobile and repeater test applications. TETRA is a global standard for private mobile radio (PMR), systems used by emergency services, public transport and utilities. P25 is a standard for digital radio communications for use by federal, state, private, and local public safety agencies in North America. Its military communications testing systems are primarily used by the United States military to test complex voice and data frequency hopping radios and accessories. Military radio and PMR test equipment has a typical life cycle of 5-20 years.
Avionics test equipment is used in the design, manufacture, test and maintenance of commercial, civil and military airborne electronic systems, or avionics. ATS equipment provides the stimulus and signals necessary for certification, verification, fault finding and diagnosis of airborne systems on the ground. For civil and commercial aviation, it has test solutions for various transponder modes, communications frequencies, emergency locator transmitters, weather radars and GPS systems. F! or milita! ry aviation, it has test solutions for microwave landing systems, tactical air navigation, enhanced traffic alert and collision avoidance systems, various identification friend or foe, or IFF, transponder/interrogator modes and IFF monopulse antenna simulation. ATS also provides customized avionics test solutions to support manual and automatic test equipment for manufacturing, repair and ground support operations. Avionics test equipment has a typical life cycle of 8-15 years.
Synthetic test systems test several attributes through one box and can take multiple complex measurements simultaneously. ATS provides synthetic test environment that allows digital, analog, RF/microwave and power test of circuits, modules, subsystems and complete systems for commercial, military, and aerospace customers. ATS' STI 1000C+ and TRM 1000C products offer synthetic microwave test systems optimized for testing Transmit/Receive modules and satellite payloads in a factory setting. Its SMART^E and SMART^E 5300 products offer a modular approach for implementing multi-function configurable and reconfigurable test systems. Synthetic test solutions products have a typical life cycle of 10-15 years.
ATS offers a variety of general purpose test solutions including microwave test solutions, counters and power meters. ATS microwave test solutions cover frequency ranges from 1 megahertz (MHz) to 46 gigahertz (GHz), with various tracking, offset, continuous wave, modulated source, fault location, and group delay configuration options provided. ATS power meters are designed for field use, automated test equipment requirements and standard bench applications. General purpose test solutions have a typical life cycle of 4-7 years.
The Company Competes with Agilent Technologies, Honeywell, BAE Systems, Hittite Microwave Corporation, ILC / Data Devices Corporation, Microsemi, Anaren, Anite, Anritsu, Rohde & Schwarz, Spirent and National Instruments.
Advisors' Opinion:- [By Jake L'Ecuyer]
Leading and Lagging Sectors
In trading on Tuesday, technology shares were relative leaders, up on the day by about 0.12 percent. Leading the sector was strength from Aeroflex Holding (NYSE: ARX) and Canadian Solar (NASDAQ: CSIQ). Cyclical consumer goods & services shares declined around 0.71 percent in Tuesday's trading.
Top Semiconductor Companies To Invest In 2014: Sunedison Inc (SUNE)
SunEdison Inc, formerly MEMC Electronic Materials, Inc., incorporated on October 1, 1984, is engaged in the development, manufacture and sale of silicon wafers. The Company is a developer and seller of photovoltaic energy solutions. Through Solar Materials and Solar Energy (SunEdison), it is a developer of solar energy projects. The Company operates in two segments: semiconductor materials and solar energy. The Company�� Solar Energy segment includes the operations of its old Solar Materials segment, as well as its SunEdison business. In the Semiconductor Materials, the Company offers wafers with a variety of features. The Company�� wafers vary in size, surface features, composition, purity levels, crystal properties and electrical properties.
Semiconductor Materials
The Company�� monocrystalline wafers for use in semiconductor applications range in size from 100 millimeter to 300 millimeter and are round in shape for semiconductor customers because of the nature of their processing equipment. Its wafers are used as the starting material for the manufacture of various types of semiconductor devices, including microprocessor, memory, logic and power devices. In turn, these semiconductor devices are used in computers, cellular phones and other mobile electronic devices, automobiles and other consumer and industrial products. Its monocrystalline wafers for semiconductor applications include four general categories of wafers: prime, epitaxial, test/monitor and silicon-on-insulator (SOI) wafers.
The Company�� prime wafer is a polished, pure wafer with an ultraflat and ultraclean surface. The Company�� epitaxial (epi), wafers consist of a thin silicon layer grown on the polished surface of the wafer. Typically, the epitaxial layer has different electrical properties from the underlying wafer. This provides customers with isolation between circuit elements than a polished wafer. Its AEGIS product is designed for certain specialized applications requiring high resis! tivity epitaxial wafers and its MDZ product feature. The AEGIS wafer includes a thin epitaxial layer grown on a standard starting wafer. The AEGIS wafer�� thin epitaxial layer eliminates harmful defects on the surface of the wafer, thereby allowing device manufacturers to increase yields. The Company supplies test/monitor wafers to its customers for use in testing semiconductor fabrication lines and processes. An SOI wafer is a different starting material for the chip making process.
Solar Energy
The Company�� Solar Energy segment provides solar energy services that integrate the design, installation, financing, monitoring, operations and maintenance portions of the downstream solar market to provide a solar energy service to its customers. As of December 31, 2012, SunEdison interconnected over 675 solar power systems representing 989 megawatt of solar energy generating capacity. As of December 31, 2012, SunEdison had 73 megawatt of projects under construction and 2.6 gigawatts in pipeline. In support of its downstream solar business, its Solar Energy segment manufactures polysilicon, silicon wafers and solar modules. Additionally, its Solar Energy segment will sell solar modules to third parties in the event the opportunity aligns with itsinternal needs. It provides its downstream customers with a way to purchase renewable energy by delivering solar power under long-term power purchase arrangements with customers or feed-in tariff arrangements with government entities and utilities. Its SunEdison business is dependent upon government subsidies, including United States federal incentive tax credits, state-sponsored energy credits and foreign feed-in tariffs. The Company�� solar wafers are used as the starting material for crystalline solar cells.
The Company competes with Shin-Etsu Handotai, SUMCO, Siltronic and LG Siltron, SunPower Corporation, First Solar, Inc., Enerparc, Sharp Corporation (Recurrent Energy), Phoenix Solar, BELECTRIC, JUWI Solar Gmbh, and S! olar City! .
Advisors' Opinion:- [By Paul Ausick]
Another possible target is the solar energy division of SunEdison Inc. (NYSE: SUNE). The company said last week that it would be spinning off its semiconductor business into a separate company next year. In the second quarter of this year the semiconductor segment provided about 60% of SunEdison�� total revenues of $401.3 million. But the company�� solar business has historically provided most of the revenues and could be both a target as operating losses in the solar energy segment continue.
No comments:
Post a Comment